STC No. | Subject | PA-15 | PA-17 | PA-16 | PA-20 | PA-22 | Comments |
SA00068SE | Installation of fuel flow/pressure instruments. (W/TSIO-360-MB1) | X | X | X | X | X | |
SA00079NY | Installation of Airwolf remote mounted engine oil filter kit AFC-K008 on single and multi engine | | X | | | | |
SA00207AT | Installation of carbon steel brake discs that have melonite surface treatment, P/N AA-67. | | X | X | X | | |
SA00215NY | Installation of CAVU Model AM100 AVMIX engine fuel/air mixture setting system. | X | X | X | X | X | |
SA00344BO | Installation of Parmetheus Plus LED PAR36 and PAR46 taxi and landing lights. | X | X | X | X | X | |
SA00478CH | Installation of Cooper Superflite 102 Fabric. | X | X | X | X | X | |
SA00680SE | Installation of Electronics International model UBG-16 or UBG-16T bar graph engine analyzer. | X | X | X | X | X | |
SA00780SE | Installation of the True Lock Safety Retention Axle Lock Nut System in accordance with AML No | X | X | X | X | X | |
SA00932SE | Installation of the Stewart wing tip assembly in accordance with Stewart Wing Tip Assembly Master | X | X | X | X | X | |
SA01015SE | Installation of eligible Alaska Tire and Rubber Company TSO-C62d Tires as listed in Approved Model | X | X | X | X | X | |
SA01026SE | Improved fuel gascolator assembly -Steve's Aircraft | X | X | X | X | X | |
SA01158WI | Installation of Aero Enhancements UV250-1 Supplemental Instrument Panel Lightning System. | | X | X | X | X | |
SA01233SE | Manufacture of Alaskan Bushwheel, Inc. (ABI) tail wheel and fork assembly per ABI Document | X | X | X | X | X | |
SA01240SE | Installation of secondary voltage indication system | X | X | X | X | X | |
SA01251SE | The manufacture of a Sunvisor System. | X | X | X | X | X | |
SA01669CH | Installation of Challenger Reusable Air Filter | | X | X | X | X | |
SA01704LA | Installation of the Grove Disk Brake System | X | X | X | X | | |
SA01757WI | Application of Stewart Systems synthetic fabric covering system to aircraft fuselage, wings, tail | X | X | X | X | X | |
SA01765SE | Installation of Alaskan Bushwheel Inc (ABI) TSO-C26d wheels, Part Number (P/N) ABI-1010. | X | X | X | X | X | |
SA01765SE | To allow the use of UL91 or UL94 (minimum) grade aviation fuel | X | X | | | | |
SA01831WI | To allow the use of UL91 (minimum) grade aviation fuel | X | X | | | | |
SA01944CH | Modify airplane to fly on unleaded automotive gasoline, 87 minimum antiknock index, per ASTM | X | X | X | X | X | |
SA01967WI | Use of GAMI G100UL High Octane Unleaded Avgas | X | X | X | X | X | |
SA02033AT | Modification to install an air-oil separator to prevent oil from being aspirated from the engine | X | X | X | X | X | |
SA02110CH | Installation of a Time Trac Data Recorder | X | X | X | X | X | |
SA02128LA | Installation of aileron and flap hinge repair bushings | X | X | X | X | X | |
SA02212AK | Replacement of existing landing and/or taxi light reflector and bulbs with high intensity discharge | X | X | X | X | X | |
SA02268CH | Installation of Airwolf Filter Corp. Air Oil Separator | X | X | X | X | X | |
SA02283SE | Installation of Electronics International Inc. Glass Panel Engine Monitor (with In Flight Data) | X | X | X | X | X | |
SA02386AK | Replacement of existing landing and/or taxi light reflector and bulbs with Light Emitting Diode (LED) lighting systems | X | X | X | X | X | |
SA02402SE | Installation of Electronics International Inc. Glass Panel Engine Monitor | X | X | X | X | X | |
SA02428AK | Installation of a hydraulically actuated ski drag assembly | X | X | X | X | X | |
SA02520AT | Installation of M-20 Oil Separator, model 600-WP. | X | X | X | | | |
SA02525LA | Installation of Wheel and Brake Assemblies | X | X | X | X | | |
SA02553AK | Fabrication and installation of a Tail Wheel Anti-Shimmy Dampener | X | X | X | X | X | |
SA02738CH | Installation of L-3 Communications Avionics Systems | X | X | X | X | X | |
SA02825NY | Installation of Aerospace Logic Aircraft Instruments | X | X | X | X | X | |
SA02987CH | Installation of the Electroair Electronic Ignition System | | X | X | X | X | |
SA04032CH | Install rocker switch assemblies | | X | X | X | X | |
SA04776NY | The HIPEC Covering and Finishing System must be performed and maintained | X | X | X | X | X | |
SA10077SC | Installation of push-button starter system. | | X | | | | |
SA11RM | Installation of modified axles, wheels and brakes | X | X | X | X | | |
SA1351WE | Replace existing fabric on wings, fuselage, empennage, and/or control surfaces, with Ceconite101 | X | X | X | X | X | |
SA144AL | Remote compass bracket. | X | X | X | X | X | |
SA1455NM | Installation of a flame proof auxiliary heater-dryer, Model12-1600. | X | X | X | X | X | |
SA1521NM | Installation of stamped aluminum wing ribs. | | X | | | | |
SA1626NM | Installation of Electronics Int'l Digital EGT/CHT Instruments and accessories. (201 Series) | X | X | X | X | X | |
SA2167NM | Installation of the Precise Flight stand-by vacuum system (SVS). | X | X | X | X | X | |
SA2190NM | Installation of electronics International Digital Volt/Amp Gauges and Accessories. | X | X | X | X | X | |
SA2350NM | Installation of Electronics International Inc digital carburetor/outside air temperature gauges | X | X | X | X | X | |
SA2508SO | Replacement of Cleveland brake discs, No. 164-67 or 164-167, with Appalachian Accessories' | X | X | X | X | | |
SA2687NM | Installation of Truboplus/ Electronics Int'l gauges and switches. | X | X | X | X | X | |
SA2693NM | Installation of Electronics International digital volt/amp gauges and accessories. | X | X | X | X | X | |
SA2844CE | Installation of a plastic cap enclosure over the anti-collision strobe light system. | X | X | X | X | X | |
SA293AL | Installation of Stoddard improved brake system. | X | X | X | X | | |
SA2NE | Installation of Cleveland wheels and brakes, 7.00-6 or 6.00-6, C38500-HA, 40-6, in accordance with | X | X | X | X | | |
SA3216WE | Installation of George M. Adams DGA-2000 or Bodell BMI-2000 wheels and Bodell BMI-252 brakes. | | X | | | | |
SA3518NM | Installation of a skylight, in accordance with Steve’s Aircraft Drawing No. SP-3200, Sheet 1 | X | X | X | X | X | |
SA3862NM | Installation of Electronics International Primary TIT/EGT/CHT instruments, remote switches and | X | X | X | X | X | |
SA4005NM | Installation of Precise Pulselite control unit in landing/taxi system. (HP Jetstream Model 3101 AND | | X | X | X | X | |
SA4-1025 | Ceconite 101 covering of complete airplane. | X | X | | | | |
SA4305WE | Installation of GAR-AERO wheel adapters and tundra type tires on the main landing gear | X | X | X | X | X | |
SA446AL | Fabrication and installation of Stoddard Aero Service Model 15 fuel tanks per Stoddard Aero Service | | X | | | | |
SA4-483 | Application of glass cloth with resin. | | X | | | | |
SA4503NM | Install Ceconite covering material. | X | X | X | X | X | |
SA460SW | Install wing tips in accordance with Cub Crafters, Inc. Master Drawing List., MDL102400, Revision C, | X | X | X | | | |
SA489EA | Installation of ARP Inc. carburetor ice detection system | X | X | X | X | X | |
SA4-977 | Installation of Fiberglass rudder post mount for either Grimes or Whelen WRM rotating beacons. | X | X | X | X | X | |
SA5159NM | Installation of chip detector system. | X | X | X | X | X | |
SA5666NM | Installation of Continental C90-8F engine with Marvel-Schebler MA-35PA carburetor, McCuley | | X | | | | |
SA573SW | Installation of Plane Booster wing tip kit 101-250. | X | X | X | X | X | |
SA5755NM | Installation of a propeller anti theft device. | | X | | | | |
SA5-9 | 25x11x4 tires and tubes with Airglass Engineering Company adapters LWA 950. | X | X | | | | |
SA5924NM | Installation of RPM instrument. | X | X | X | X | X | |
SA5925NM | Installation of oil pressure/temperature instrument. | X | X | X | X | X | |
SA593CH | Install Champion SlickSTART magneto booster system. | X | X | X | X | X | |
SA615EA | Installation of Whelen Anti-Collision Strobe Light Systems, Part Number 01-0770006-( ), | X | X | X | X | X | |
SA69NW | Installation of Matney's engine charge air-air filter assembly. (AA-1B, AA-1, AA-1A 1969 AND ON) | | X | | | | |
SA71GL | Installation of air filters | | X | X | X | X | |
SA7965SW | Application of fabric and polyurethane finishing system. | X | X | X | X | | |
SA800EA | Installation of Aviation White Anti-Collision Strobe Lights. Whelen Models A429, A430, A434, A450, | X | X | X | X | X | |
SA8075SW | Installation of fiberglass covering. | X | X | | | | |
SA95AL | Maule SFS-1-4-P8 tail wheel; Hayes D-15-26 brake assembly using Kennedy Air Service adapter 64-1; | X | X | X | X | | |
SA99AL | Installation of six-inch wheels and brakes. | X | X | X | X | | |
ST01700NY | Installation of the following Aerospace Logic aircraft instruments: EGT-100 Exhaust Gas Temperature | | X | X | X | X | |
ST02291AK-A | Fabrication and installation of a Tail Wheel Anti-Shimmy Dampener | X | X | X | X | X | PA-22 when converted |